Shanghai Chengjing Industrial Development Co., Ltd.

Contact Us

电话:021-54155658

传真:021-54850067

手机:13671918056

联系人:Mr. rong

邮箱:rxccjlaser@163.com

地址:Shanghai city Fengxian District huHang Highway No. 479

您现在的位置:Home > NewsNews

What are the fault points of laser engraving machine

发布日期:2013/8/5

Laser engraving machine laser tube current must be reasonable, not long-termin light intensity; reasonable application of laser and laser energy saving; the light path system to clean properly, otherwise cause aging and premature rupture of laser tube, laser machine work time should be adjusted in strong 50-60% and then according to the material to adjust working speed. Laser power supply cooling should be smooth, otherwise but working temperature above 50% current regulation will rise too high, so that the laser power increasing failure rate. Laser engraving machine can take the door off, the power emitted heat directly emitted. The cooling system to the ground, often clean the water tank and water tank, refrigeration and temperature control temperature controlpoints must be reasonable, otherwise easy to damage the laser tube andcondensation power down, cold water head tube shedding, shortens the service life, sometimes unable to work, causing continuous tube exchanger.Laser engraving machine focusing mirror and mirror examination, working for aframe on the fever, the lens surface discoloration, rust; stripping crackingbelongs to object to change, especially many customers with large air pump and air compressor, so in the focusing lens will soon in water, so must be timelyto check the lens (laser tube outlet) cleaning and quality of the optical system.The cooling system of laser engraving machine to the ground, often clean thewater tank and water tank, refrigeration and temperature control temperature control points must be reasonable, otherwise easy to damage the laser tubeand condensation power down, cold water head tube shedding, shortens the service life, sometimes unable to work, causing continuous tube exchanger.